Franchise Fees as a Percentage of Sales: Why the Royalty Rate Understates the Bill

11.5 percent of sales is what a U.S. franchisee at Wingstop or Domino's pays in royalty plus national advertising contributions under each brand's current standard terms, and that is only part of the bill. Franchise fees as a percentage of sales is the share of a unit's revenue that goes to the franchisor and its funds. Find it by adding every percent-of-sales fee, then converting each flat or per-order fee into a percentage at the unit's own sales volume.
Wingstop's annual report for fiscal 2025 says its current standard agreement requires a 6.0 percent royalty and a 5.5 percent Ad Fund contribution, both on gross sales net of discounts. Domino's annual report for the same year lists a 5.5 percent royalty and says U.S. stores generally contribute 6.0 percent to the national advertising fund, with lower rates in some cases. A wing chain and a pizza chain arrive at the same total.
What counts toward franchise fees as a percentage of sales?
Count every recurring payment that scales with revenue: the royalty, the national advertising fund and any regional advertising the agreement requires. Then add the payments that do not scale, such as monthly technology fees, per-order fees and minimum royalties, by dividing each annual dollar amount by the unit's annual sales.
Neither annual report's figure is the whole bill. Domino's says its royalty comes with certain technology fees and that stores generally spend more on local marketing. The rates also move. Wingstop raised its Ad Fund contribution from 5.0 percent to 5.3 percent in the second quarter of fiscal 2024 and to 5.5 percent at the start of fiscal 2025. It reports a domestic average unit volume of about $2.0 million, so the 0.5-point total rise costs a typical unit $10,000 a year ($2,000,000 times 0.005).
A low royalty is not a low fee load. Take two invented brands. Brand C charges a 4 percent royalty and a 7 percent advertising contribution, a load of 11 percent. Brand D charges a 7 percent royalty and a 2 percent contribution, a load of 9 percent. The brand with the lower royalty is the more expensive one.
Worked example: two brands with the same royalty and different bills
Both brands in this example are invented. Brand A charges a 6 percent royalty, a 2 percent advertising contribution and a $1,200 monthly technology fee. Brand B charges a 6 percent royalty and a 4 percent advertising contribution, with no technology fee. Brand B's fee load is 10.0 percent at every sales level. Brand A's technology fee is $1,200 times 12, or $14,400 a year, so its load is 8 percent plus $14,400 divided by the unit's sales.
At $500,000 in sales, Brand A pays $40,000 in percent-of-sales fees plus $14,400, a load of 10.88 percent, or $54,400, against $50,000 for Brand B. At $900,000 it pays $86,400, or 9.6 percent, against $90,000. At $1,500,000 it pays $134,400, or 8.96 percent, against $150,000. The two brands cost the same at $720,000, because $14,400 divided by the 2-point gap between 8 and 10 percent is $720,000.
Which brand is cheaper depends on the unit, not the brand. A flat fee looks small on a strong unit and heavy on a weak one, so a candidate who benchmarks only the royalty is comparing the wrong number.
How do per-order fees and minimum royalties change the percentage?
A per-order fee converts to a percentage when you divide it by the average ticket: $0.50 on a $20 order is 2.5 percent of sales, and on a $40 order it is 1.25 percent. A minimum royalty works the other way. It adds nothing in a strong year and raises the load when sales fall below the floor.
Take a 6 percent royalty with a $3,000 monthly minimum. The floor is $36,000 a year, which equals 6 percent of $600,000 in sales. A unit that sells $500,000 still owes $36,000, an effective royalty of 7.2 percent instead of 6.0. Both fee types behave like the technology fee above: they weigh most on the units that can least afford them. Our earlier posts on minimum royalty floors and on what a franchise technology fee covers go through the contract language behind each.
What does Item 6 require franchisors to disclose?
Under 16 CFR 436.5(f), Item 6 of the franchise disclosure document must list, in one table, every other fee the franchisee pays the franchisor or its affiliates, or that they collect for a third party, with the type, amount, due date and remarks. The table lists fees line by line and does not total them.
That is the federal rule as the eCFR displayed it on October 22, 2026, and state registration laws can add requirements of their own. If a fee may increase, the franchisor must disclose the formula or the maximum increase, and a percentage of sales is acceptable only if the agreement defines gross sales. The same rule requires a financial performance representation in Item 19 to state how many of the outlets in the data attained or surpassed the stated result, which tells you where to pick the sales levels for your own fee-load sheet.
A five-line fee-load scorecard for candidate conversations
Build this sheet once per brand and rerun it whenever Item 6 changes. Every input is in your disclosure document.
Line 1 is the percent-of-sales total: royalty plus advertising fund plus any required cooperative contribution. Line 2 is the flat-fee total: every monthly or annual dollar fee, divided by sales at a low, middle and high level taken from your Item 19 revenue figures. Line 3 is the per-order fee divided by the average ticket. Line 4 is the floor test: the larger of the calculated royalty and the minimum royalty at each sales level. Line 5 is the trend: what each rate was three years ago, and what Item 6 lets it rise to.
Add lines 1 through 4 at each sales level and you have one fee-load number per level. For Brand A above that is 10.88, 9.6 and 8.96 percent. Line 5 turns a single number into a conversation: a half-point advertising increase is $10,000 a year on a $2,000,000 unit, and a candidate should ask whether the agreement allows more of the same.
Two mistakes distort the sheet most often. Using the average sales figure for a candidate who will likely open a weaker unit hides the flat fees, so test the low level too. And fees paid to the franchisor's affiliates belong in the total, because Item 6 covers them as well.
What to put in front of a candidate before the first validation call
Bring the sheet to the call yourself. A candidate who finds 10.88 percent by dividing a flat fee into a weak unit's sales is doing your math without your context, so give the number first and explain what drives it. Revscale's franchise development agents work the top of the funnel and hand warm candidates to your team, which owns the FDD and validation conversations where this sheet belongs.
Before your next candidate asks, calculate franchise fees as a percentage of sales at your own low, middle and high Item 19 levels, and put one fee-load figure per level on a single page. This is general information, not legal, tax or financial advice; confirm specifics with a qualified advisor.